How to use Instant Photo Mode on the Contour ROAM3 camera
1) Activate Instant Photo Mode
Press and hold the Status Button for three seconds. You will hear two beeps and see the photo LED turn green, indicating that Instant Photo Mode has been activated.
2) Take photographs by pressing the Status Button
You will hear a beep and the photo LED will flash to indicate that a photograph has been taken.
3)Turn off Instant Photo Mode
Turn off Instant Photo Mode by pressing and holding the status button for a few seconds. The camera will beep three times and the photo LED will flash and then turn off, indicating that Instant Photo Mode is turned off.
-If a photo has not been taken for 60 seconds or longer, your camera will automatically power down.