Outer Lens Replacement - ROAM3

Lens Replacement for Contour ROAM3

By replacing the lens protector on your Contour ROAM3, you are effectively VOIDING the waterproof portion of the camera warranty. However, if you install the new lens protector properly, you should have no problems maintaining the waterproof rating of your Camera.


1) Using a small Philips head screwdriver (such as one suited for eye-glass repair), remove the set screw holding the lens bezel in place


2) Unscrew and remove the lens bezel


3) Replace lens (and if necessary the seal) ensuring notches in outer lens are properly aligned.


4) Replace Bezel and set screw.

when the bezel snugs up to the camera body and gets tight, rotate the lens bezel until the set screw hole in the lens bezel lines up with the set screw hole on the camera body.  install the set screw but DO NOT OVERTIGHTEN, as you could potentially strip the set screw.


   Please contact our support team at Support@contour.com if you have any questions

seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found