• Where is the middle section of the goggle mount?

    The ContourHD 720p and 1080p cameras come with a circular flat surface mount and a goggle strap mount. The center disc of the flat surface mount is intended to also be used with the included goggle strap mount. The center disk of the flat surface mount can be a bit tricky to separate from the outer disk the first time you try it. See if these instructions help: 1. Insert the camera on the rails of the moun...

  • What if the mount fails? Is my camera covered under the warranty?

    The mounts for all of our cameras are designed to help you get the shot you want. They'll hold the camera in place while shooting, but they are not a guarantee against loss or damage of the camera. Customers are encouraged to check the camera's mounting prior to use and also take any additional precautions that are prudent for the situation. For example, all of the our camera's have two mounting points loc...

  • How do I keep the video upright when I mount the camera on its side?

    All of the Contour cameras have a lens bezel (the outer ring of the camera's lens) that rotates. This means that you can turn the camera's lens to stay upright even when the camera body is mounted as an off angle. The ContourHD 720p, ContourHD 1080p, and ContourGPS all have lens bezels that will rotate 180°. The Contour+ and ContourROAM have lens bezels that will rotate 270°. To rotate the the lens bezel,...

  • What mounts will work with my camera?

    Most of the mounts we sell will work with all of our cameras, however there are a few that do not fit the ContourROAM and are being redesigned. They are the older style of rotating flat surface mount (the square one) and the old surf mount. Also, the Universal mount will not work with the ContourROAM but that camera already has the same 1/4" 20 screw socket on the bottom thus eliminating the need for ...

  • Recent Q&A

    • Kevlar helmet mount

      Is there a helmet mount that will work on a military style kelvar helmet. If so what mount is it?

      1 Agent Answer 0 Community Answers Dec 29, 2012 10:59PM MST
    • Vented Helmet Mount

      How do i release camera from mount. camera will slide most of the way back but stops before full release. tried to force a bit, but will not release. Is there a button on the mount or camera or some other trick to get the release?

      1 Agent Answer 0 Community Answers Dec 26, 2012 11:50PM MST
    • what's your recommendable mount for snow board?

      I want to mount the camera on the snow board. what's your recommendable mount for snow board? Can you advise me?

      1 Agent Answer 1 Community Answer Dec 03, 2012 06:17PM MST
    • shotgun mount?

      Is there a mount for a shotgun for the contourROAM2?

      1 Agent Answer 0 Community Answers Nov 28, 2012 03:38PM MST

    View All Questions

    or Post a Public Question
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found