Name is required.
Email address is required.
Invalid email address
Answer is required.
Exceeding max length of 5KB

configuration contour gps

blanc Feb 23, 2016 12:04PM MST

dans story teller outils configuration camera est inactif
comment faire

Up -2 rated Down
Hi Blanc,

Contour cameras use a standard miniUSB cable (included with the camera) for a quick plug and play connection to a Windows or Mac computers.

In order to have Storyteller recognize the camera, first make sure you have a properly formatted the microSD card seated in the camera. For steps on how to format the microSD card for your model of Contour camera, see the article called How do I format the micro SD card?

With the camera powered off, open the back door of the camera and connect the mini-port end of the included data cable to the back of your camera.
Connect the other end of the cable to an available port on your computer. In a few seconds, your computer will automatically detect the Contour camera and will pass this information into the Contour Storyteller program.
In Storyteller, you will see your Contour camera listed in the upper-left section of the screen under DEVICES.

If you are having trouble getting Storyteller to recognize your camera, try these troubleshooting steps.
Reformat the microSD card. See the article called How do I format the micro SD card? for help on this.

Try using a different USB port on the computer. Not all USB ports are powered the same way. This is especially true on laptops. There is usually one port that has power and the other ports are wired from that "master" port. The camera needs to have the full load of power in order to charge the battery and also act as a microSD card card reader.

Try using a different USB cable. There is nothing special about the USB cable that we include with the camera and it is possible that you have a bad cord. Any USB cord with the correct ends will work.

Try using a different computer. This to eliminate your computer as issue and try to isolate it to the camera.

Try using a different microSD card. If you have swapped out the original microSD card for a different one, the new card may need to be formatted.

Best Regards,

Contour Support
Gio Feb 26, 2016 04:35PM MST CONTOUR Agent

*To update date your profile image add an image at gravatar.com.

This question has received the maximum number of answers.

support@contour.com
http://assets1.desk.com/
false
contour_cam
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete