Only the ContourROAM is waterproof without a case, and then just to 1 meter (3 feet). For all other camera and situations where the camera is likely to get wet, you will want to place the camera in a waterproof case. We offer waterproof cases for all of our cameras, but it is important that you select the right case for your camera. Each case only works with a specific model of camera. If you select the...
The waterproof case for the ContourHD 1080p is rated for a depth of up to 10 meters (30 feet). The waterproof cases for the ContourGPS, Contour+, and ContourROAM are all rated for a depth of up to 60 meters (180 feet).
Each model of Contour camera has a specific waterproof case that they work with. If you get the wrong case, then the camera may not fit or may be too loose in the case. In addition, using the wrong case will also likely cause the power and record buttons to work incorrectly.
Just using the case will not prevent the GPS or Bluetooth functions from working. However, both Bluetooth and GPS signals will be greatly diminished by water, and wil not work well underwater.
1080p and 720p We have found that some of our waterproof cases for the 1080p have a switch that does not fully activate the record switch inside the camera. If you have one of the orange cases and it has this problem, contact Support for assistance. ContourGPS, Contour+, and ContourROAM If you have a ContourGPS, Contour+, ContourROAM waterproof case and the record slider is not activating the camera's r...
The Universal mount is an add-on for the older Contour cameras that allow the camera to be mounted on a tripod or any other 1/4" 20 threaded device. This mount is intended for the ContourGPS, ContourHD 1080p, and ContourHD 720p. The Universal mount is not needed on the Contour+2, ContourROAM2, Contour+, or ContourROAM. These cameras have a 1/4" 20 mount built in to the bottom of the cameras. Forcing the ...
Where the heck to I get a replacement lens cap for the Contour Roam - HELP!
Id the HD720 weatherproof to take snowboarding. what i need to know is if it gets wet (after a fall in the snow) will it cause problems>>> whats the overall OFFICIAL verdict on this?
what are the adhesives with the foam on them for? i ordered the helmet mount kit and it came with two
Camera: Countour Plus Memory Card: Sandisk Ultra 32GB model:SDSDQU-032G-U46A For some reason i'm not able to format this card. I have the newest firmware 1.36.15. I have followed instructions but when I press format button i don't get beep sound. It doesn't matter how long I press it. This is how I made it: 1. Power up the camera with the microSD card installed. 2. Using a pin or small nail...
My contour + videos sometimes have no sound. I updated the firmware last october. Any advice? Thanks